Reader guide to this batch
The stainless steel kitchen blog on the roof, the wall and the water between them
The stainless steel kitchen blog stays outside on this page and works from the top down. It opens with the two ways of covering a run, a gazebo and a pergola, then takes the weather that reaches an uncovered set, and only then moves inward to the water running through it.
The remaining three cards fill the gaps between those subjects. A modular run is the answer when the space is an awkward shape, a backsplash card deals with the wall where a steel top meets it, and a cutting board card covers the one habit that keeps a worktop out of the scratch conversation.
Where to start in this batch
- Read the shelter card before a run is planned outside.
- Take the weather card if the set is already exposed.
- Use the modular card when the space is unusual and a standard run is not.
- Open the backsplash card once the top is set and the wall behind it is bare.
- Finish on the welded-sink card and the cutting board card for the two habits inside the run.
A roof, a modular shell, a wall and the water in between
Two cards on cover and weather, then a modular shell, a backsplash line, a welded bowl and a cutting board.
| Guide in this batch | Focus | Read it when | One line to take away |
|---|---|---|---|
| Modular Outdoor Kitchen Cabinets: Customize Your Setup | A modular run assembled to fit | The space is unusual and a standard run is not | Modules buy tolerance without a new drawing |
| Stainless Steel Countertops and Backsplash: Joint Guide | Bogeqi | The backsplash line above a steel top | The top is set and the wall behind it is bare | One joint done well beats three done cheaply |
| Gazebo vs Pergola Outdoor Kitchen: Which to Build? | Bogeqi | Gazebo against pergola as shelter | The cover for the run is still open | Choose the roof before the run |
| Weatherproof Outdoor Kitchen Cabinets: Rain & Sun | Rain and sun on an exposed set | The set is built and the weather is not negotiable | Build for the water, not for the summer |
| Stainless Countertop with Sink: Welded Basin Guide | Bogeqi | A sink formed into the countertop | The top is being drawn around a bowl | A welded bowl removes the rim |
| Stainless Steel Countertop Cutting Board: Best Practices | Using a cutting board on steel | The top is in daily use | Board first, blade never on the steel |
The order matters because shelter is the one decision that cannot be added later without rebuilding. A gazebo and a pergola give very different amounts of cover, and the difference shows up not in the summer the set is installed but in the winter afterwards.
The modular card is placed next because it answers a problem that a drawing cannot. An angled wall or an awkward return is often cheaper to solve with modules than with a new drawing, and the tolerance that buys is the whole point of the system.
The two water cards at the end are the smallest and the most used. A welded bowl removes the rim that collects debris, and it is the detail most often left out of a quotation because it is invisible on a plan. A cutting board is the cheapest protection a worktop can be given.
Read the six cards together and an outdoor build becomes a list of layers: cover, shell, wall, water, hardware and habit. Each layer costs less than the one before it and protects more of it, which is why starting at the roof is the cheapest decision on the page.
Questions about this batch
Three questions that come up about this batch.
Gazebo or pergola for a run that gets rain?
A gazebo, if the run is used in wet weather. A pergola gives shade and structure rather than cover, which is a different job.
Is a modular run a compromise on quality?
Not on the shell. It changes how the cabinetry is dimensioned, not what it is made of, and it is often the better answer in an awkward space.
Does a welded sink change the worktop cost much?
It adds to the forming rather than the metal, and it removes a rim that would otherwise collect debris for the life of the top.
Where to go next
The outdoor modules and runs here are drawn with sizes on the product tickets, and built versions are in the delivered projects.
The quality page sets out what is checked before crating, and a terrace can be quoted from the contact form.